Katup Gerbang Segel Kursi Tangguh

1.PengenalanKatup Gerbang Segel Kursi Tangguh

Katup Gerbang Segel Kursi Tangguh are also called lifting stem gate valves, also called rising stem gate valves. Usually there is a trapezoidal thread on the lifting rod, through the nut on the top of the valve and the guide groove on the valve body, the rotary motion is changed into linear motion, that is, the operating torque is changed into operating thrust. The opening and closing part of Katup Gerbang Segel Kursi Tangguh is a gate. The movement direction of the gate is perpendicular to the direction of the fluid. It can only be fully opened and closed, but cannot be adjusted or throttled. The Katup Gerbang Segel Kursi Tangguh produced by Milestone Valve Company have stable performance and are used in various fields such as petroleum, chemical industry, and water conservancy.

2. Parameter Teknis dariKatup Gerbang Segel Kursi Tangguh

3.Key points of operation of Katup Gerbang Segel Kursi Tangguh:

1) The opening and closing direction of Katup Gerbang Segel Kursi Tangguh should always be closed clockwise.
2. Pneumatic valves in the Katup Gerbang Segel Kursi Tangguh pipe network are often opened and closed manually, and the number of opening and closing revolutions should not be too much, that is, large-diameter valves should also be within 200-600 revolutions.
3) Katup Gerbang Segel Kursi Tangguh In order to facilitate the opening and closing operation of one person, the larger opening and closing torque should be 240N-m under the pressure of the pipeline.
4) The opening and closing end of Katup Gerbang Segel Kursi Tangguh should be a square tenon, with standardized dimensions, and face the ground so that people can directly operate it from the ground. Valves with roulette are not suitable for underground pipe networks.

4. Pengemasan dan Pengiriman

5. FAQ

1. Dapatkah saya memiliki pesanan sampel untuk katup?
A: Ya, kami menerima pesanan sampel untuk menguji dan memeriksa kualitas, sampel campuran diterima.
2. Apakah Anda memiliki batas MOQ untuk pesanan katup?
A: MOQ Rendah, 1 PC untuk pemeriksaan sampel tersedia.
3. Bisakah Anda menawarkan layanan OEM?
A: Ya, OEM tersedia.
4. Bagaimana dengan pembayarannya?
A: Kami biasanya menerima deposit 30%, dan keseimbangan akan dibayar sebelum pengiriman. L7C baik-baik saja
5. Bagaimana waktu pengiriman katup kupu-kupu Anda?
A: Untuk sebagian besar ukuran, DN50-DN600, kami memiliki stok suku cadang katup, dapat dikirim dalam 1-3 minggu, ke pelabuhan terdekat Tianjin.
6. Bagaimana garansi produk Anda?
A: Kami biasanya menawarkan garansi 12 bulan dalam layanan atau 18 bulan sejak tanggal pengiriman.
7. Apa standarisasi produk Anda?
A: GB/T12238-2008, JBfT 8527-1997, API 609,EN 593-1998, DIN 85003-3-1997

6.Informasi Kontak